.080 (2.03) .050 (1.27) .005 (.130) 5 energy w ay , w est w arwick, ri 02893 usa t el: 800.424.9850 | 401.823.5200 fax: 401.823.8723info@advanced.com | www .advanced.com cat alog 16a products shown covered by patents issued and/or pending. specifications subject to change without notice. inch/(mm) how to order board to boardconnectors female male features: ? low profile connector system for1.00mm pitch cable to board or board to board applications - only .100/(2.54mm) tall on female (socket) side. ? robust design features screw-machined terminals and multi- finger contacts rated at 3 amps. ? fits within existing board layouts. ? over -molded lead frame seals sur face mount pins to prevent solder wicking. ? smt and thru-hole designsavailable. ? passed 20-day mfg test. specifications: terminals: brass - copper alloy(c36000) astm-b-16 contacts: ber yllium copper (c17200) astm-b-194 lead frame: ber yllium copper (ca 172) plating: g - gold over nickelgh - heavy gold over nickel m - matte t in over nickel gold per astm-b-488matte t in per astm545-97 nickel per qq-n-290 rohs compliant: m - matte tin row count 2-dual row dhs 2 xx - 844 g g - m terminal type lead frame plating consult factory or web site. total number of pins body type dhs - molded smt terminal plating contact plating rohs compliant: g - gold rohs compliant: g - gold rohs compliant: m - matte tin row count 2-dual row dham 2 xx - 846 g - m terminal type lead frame plating (dham only) consult factory or web site. total number of pins body type dham - molded smt dha - flexible thru-hole terminal plating rohs compliant: g - goldgh - heavy gold - 846 (dham)- 845 (dha) female male description: molded smt socket (dhs) material: high t emp. liquid cryst al polymer (lcp) index: -40c to 260c (-40f to 500f) description: molded smt header (dham) material: high t emp. liquid cryst al polymer (lcp) index: -40c to 260c (-40f to 500f) description: flexible thru-hole header (dha) material: polyimide filmindex: -269c to 400c (-452f to 752f) table of models packaging: dhs is supplied in t ape and reel p ackaging. packaging: dham is supplied with pick-and-place cover in t ape and reel p ackaging. dha is supplied in st andard trays. (t rays are not suit able for automated pick-and-place processes). mezza-pede ? low profile smt connectors .039/(1.00mm) pitch ? for cable to board or board to board applications
board to boardconnectors 5 energy w ay , w est w arwick, ri 02893 usa t el: 800.424.9850 | 401.823.5200 fax: 401.823.8723info@advanced.com | www .advanced.com cat alog 16a products shown covered by patents issued and/or pending. specifications subject to change without notice. inch/(mm) available online: ? additional test data and reports ? cad drawings how it works dhs/dhamdhs/dham dhs/dham dha dha dha .171/(4.34).290/(7.36) .722/(18.34) .197/(5.00).315/(8.00) .748/(19.00) .1 18/(3.00) .236/(6.00) .669/(17.00) .1 18/(3.00) .236/(6.00) .669/(17.00) 8 1436 8 1436 a b number of pins dimensional information 2 x 4 2 x 7 2 x 18 2 x 42 x 7 2 x 18 row count configuration part number b a .090 (2.29) .150 (3.81) b a .090 (2.29) .150 (3.81) b a .095 (2.41) note: pin to pin sp acing is.039/(1.00). lead frame wid th is .010/(0.25). dhs dham dha .105 (2.67) .080 (2.03) .128 (3.26) .011/(.280) .050 (1.27) .139 (3.54) .005 (.130) .011 (.280) .012 (.290) thru-hole flex cable application 1. the male terminals are supplied in a polyimide film carrier to facilit ate handling. 2. a stif fener with a recommended thickness of .020 inches should be used between theterminal pins and the flex circuit. (s tif fener not supplied) 3. the recommended maximum hole in the stif fener is .018 diameter . 4. the flex circuit should have a minimum diameter plated through hole of .016. st andard practices for flex circuit thru-hole and annular rings should apply . 5. an fr-4 cover can be used to protect the top solder joint s if required. (not supplied) smt board to board application 1. in an smt application, the smt socket (dhs) or either header (dha, dham)can be used on pc boards, rigid flex or flex circuit s. 2. smt p ad size should meet ipc st andards for surface mount component s. 3. see lead dimension and foot size on applicable cad drawing for reference. 4. t ape and reel p ackaging is provided for smt assembly . typical applications ? t unable laser power connector (flex cable to board) ? t unable laser connector (board to board) ? signal connector (flex cable toboard) ? low profile board to boardconnector mezza-pede ? low profile smt connectors .039/(1.00mm) pitch ? for cable to board or board to board applications
|
